Featured Products

Accuracy in Paintball
For all intents and purposes, including those of physics and science in general, no marker can be more accurate than another because no bolt configuration can be more accurate than another, in theory. However, in the real world, this idea rarely plays out as it is intended to. Wind positions, temperature, your FPS reading, all of these will change on a second-to-second basis. Unless one could play in a vacuum that were to be kept at a constant temperature, and used equipment that could keep dead-on consistency at all times, there is no way to prove that a closed bolt marker is more accurate than an open bolt, or that it is the same. In fact, any test on the subject is flawed the second it begins, because of the aforementioned variables present (or absent, depending). There are, however, several ways to improve or control the accuracy of your paintball marker. The most important involves the match in barrel and paintball bore sizes. Even slight differences in this match can allow for a severe decrease in accuracy. The best way to test for a paint/barrel match is called the "blow test." In order to perform this operation, simply insert a paintball into one end of the barrel, and attempt to blow the paintball out of the other end. If it comes out with some slight force, it should be satisfactory. However, if it requires a minimal or profuse amount of force to propel the paintball from the barrel, you have a ball that is either too small or too large, respectively, for your barrel. Click here for a well written article on how to choose the right barrel.
Next up is getting the best air system you can possibly find. Look for one with a high flow and recharge rate and a well built regulator. The PSI (pounds per square inch) and CI (cubic inches) of the tank does not affect accuracy. The final method to improving accuracy is to purchase a high-flow regulator, inline, bottomline, or sideline (along the side of the marker; a rare find these days). A high flow will significantly increase accuracy because it will allow more air to flow inside of the marker, increasing consistency, a major factor in accuracy. By following all of these steps, your marker should be as accurate as possible. Keep in mind the effects of barrel length on range and accuracy found later in this manuscript before choosing your new tubular trajectory correction device.

About Direct Paintball

DirectPaintball.com has been around as an informational site since the 1990s. Now we are selling a full line of paintball guns, markers, , hoppers, packs, tubes, goggles, barrels ,scenario products and paintballs. We have been in the paintball business since pump guns and 10-round paintball tubes were the main equipment. We carry full lines of some major manufacturers and our Paintball Museum shows products from Smart Parts, Ariakon,Spyder, Proto, Piranha, Tippmann, WDP/Angel, DYE, DraXxus, Empire, JT USA, Worr Games, and Shocktech equipment, as well as products by other major manufacturers.

Direct Paintball is committed to our customers and to the sport of paintball.